THE AMP RIDER
AMP Tour

Cutting Deck


  • 34" Deck enhances maneuverability in tight spaces.
  • Precise Height Adjustment from 1.5" to 4.5" assures a manicured landscape appearance.
  • Two Marbain® Steel Blades are specially hardened to stay sharper longer; designed to optimize lift and minimize drag, increasing run time.
  • For best cutting performance mow when grass is 2"-3" high.
  • Cutting capability can extend to grass 5" high.
  • Not recommended for grass height exceeding 5" high.

Batteries


Five 48-volt VRLA Battery Packs:

  • Comprised of four 12-volt AGM (Absorption Glass Mat) batteries.
  • AGM design was originally developed for military aircraft where power, weight, safety and reliability were critical.
  • On the AMP™ Rider electric mower this design eliminates sloshing and potential spillage from tipping.
  • Batteries Bundled to effectively extend the average mowing time up to 75 minutes.

Batteries Designed for 200 Charges:

  • A real advantage with the battery system is that if a single pack fails, it can be replaced individually.

Brushless Electric Motors


Three Brushless Motors:

  • One 4.0 hp traction motor and two 1.7 hp spindle motors.
  • This combination delivers the same drive and cutting power as a conventional rear- engine gas-powered mower.
  • Brushless Design reduces friction, which provides more power.
  • No Service Required.
  • Unsealed Design allows the motors to run cooler, longer.
  • Two-Year Warranty

Padded Seat


  • Mid-back Padded Seat adjusts a full 2-1/2" front to back.
  • Safety Sensor automatically stops the cutting blades should the operator rise off of the seat.
  • Innovative Drain Design eliminates standing water on the seat, which keeps it dry.
  • Optional Armrests Available to enhance operator comfort.

Operating System


  • Easy-to-Access Single Control Panel includes: Keyed on/off switch, blade on/off kill switch, battery level indicator, and battery discharge meter.
  • Advanced Low Charge Indicator gives an early warning by FLASHING approximately 10 minutes before battery is totally discharged.
    • AMP™ Rider electric mower automatically shuts off cutting blades when battery voltage is reduced to a point where batteries should be recharged to avoid battery damage.

Steering System


  • Conventional Steering Wheel Design is 13-1/2" in diameter and features a textured grip for improved operator control.
  • Tight 16-1/2" Turning Radius enhances maneuverability and is twice as tight as a conventional lawn tractor.
  • Ariens® Precision Rack and Pinion Steering assures smooth operation and ease of use.
  • Pivoting Front Axle keeps all wheels on the ground for added stability and traction across uneven terrain.

Hydrostatic Transmission


  • Traction Motor delivers constant torque to efficiently generate more power.
  • No Clutch, No Shifting, simply push the foot pedal forward and the AMP™ Rider electric-powered mower goes forward; push the foot pedal backward to go in reverse.

Smooth, Controlled Acceleration:

  • Acceleration from 0-5.0 mph (push pedal forward and the wheels quickly begin turning at 5.0 mph, there’s no ramp-up time); reverse speed is 2.5 mph.

Battery Charger


Standard 5-amp Charger:

  • Weighs approximately 10 lbs.
  • Fully recharges the battery in 16 hours.
  • For the off-season, simply leave the battery plugged into charger. Once fully charged, the charger hibernates for 30 days and then checks the battery. If a charge is needed, the battery is restored to full charge and the charger again returns to hibernation.

Optional 20-amp Charger:

  • Weighs approximately 40 lbs.
  • Fully recharges the battery in five hours.
  • WARNING: Rapid charging will reduce battery life.


Media Room | FAQ | Contact | Terms of Use | Site Map | Privacy Policy
© Copyright 2009 Ariens. All rights reserved.